Prelam HMR Board || Particle Board Manufacturers in Chennai, Tamilnadu & India, Chopralam

Plain HMR Board

Prelam HMR Board

No risk of de-lamination.
Resistant to abrasion, household chemicals, steam, cigarette burns and cracking.
Can be used where the panel is exposed to high moisture and humidity.
Free from waves, air pockets or any other bonding defects
Unlike pre-laminated particle board and plywood, the edges are smooth and hence it reduces the cost of finishing.
No additional cost in finishing the surface of panel.
Available in wide range of shades in pastel & wood grain.

Furniture, Partition, Flooring & Ceiling, Wall paneling, Kitchen cabinets and shutters.

Physical and Mechanical and Mechanical Properties of

S.No	Properties	Unit	Prelaminated HMR Board Specifications As Per IS : 14587-2003 GRADE 1 (EXTERIOR GRADE)
1.	Density Variation (Max.)	%	+ / – 10
2.	Water absorption (Max.)	%	—–
	a) 2 hours	—–	6
	b) 24 hours	—–	12
3.	Thickness swelling (Max.) 2 hours	%	4
4.	Modulus of rupture (Min)	N/mm2	—-
	a) Up to 20mm thickness	——-	——-
	Average	——-	28
	Minimum individual	——-	25
	b) Above 20mm thickness	———	———
	Average	——-	25
	Minimum individual	——-	22
5.	Modulus of elasticity	N/mm2	—–
	a) Up to 20 mm thickness	———	—— —
	Average	——-	2800
	Minimum individual	——-	2500
	b) Above 20 mm thickness	——-
	Average	—–	2500
	Minimum individual	—–	2300
6.	Tensile strength perpendicular to surface	N/mm2	——-
	a) Up to 20 mm thickness	N/mm2	——-
	Average	—–	0.8
	Minimum individual	—–	0.7
7.	Tensile Strength Perpendicular to surface	N/mm2	——-
	a) After cyclic test*	——-	—–
	Average	——-	0.45
	Minimum individual	——-	0.40
	b) After accelerated water resistance**	——-	—–
	Average	——-	0.30
	Minimum individual	——-	0.25
8.	Screw withdrawal strength (Min.)	N	—–
	a) Face	—–	1500
	b) Edge	—–	1250
9.	Abrasion resistance (Min.) in number of revolutions:	—–	—–
	a) Type III	—–	1000
	b) Type II	—–	450
	c) Type III	—–	250
	d)Type IV	—–	75

STANDARD SIZE:
2440mm × 1220mm (8’x4′)
1830mm x 1220mm (6’x4′)